LM104 Device Driver Revision History:
1.0
Original revision based on Echelons Micro-processor
Interface Program Model Number 23200 (MIP/P50 Developer's Kit)

2.00
The reset_mip() and read_isr() functions in the file MIP_PIO.C
were modified. A loop was added in the reset_mip() due to 
the narrow IOW cycle width to insure the reset pin is
held low long enough for a proper neuron hardware reset.
The file MIP_EXEC.C was also modified so that the
signon message no longer credits Avalon Control Technologies
since Vista Electronics, Inc. has purchased Avalon
Control Technologies.

2.10
The command line parsing now allows any IRQ number
from 3 to 14 in file MIP_EXEC.C. Before, only IRQ's 
3,5,10,11 and 12 were supported. NOTE: even though
the driver now accepts IRQ's 3 to 14, the board
only supports IRQ's 3,5,10,11 and 12 without a 
hardware modification.


For additional information contact:
Vista Electronics, Inc.
Phone: 661-294-9820
Phone: 800-VISTA-99
Fax: 661-294-9857
Email: vista@vistaelectronics.com
URL: http://www.vistaelectronics.com
