LM104 Device Driver Revision History:
Version 1.0
Date 10/10/94
Original revision based on Echelons Micro-processor
Interface Program Model Number 23200 (MIP/P50 Developer's Kit)

Version 2.00
Date 04/04/97
The reset_mip() and read_isr() functions in the file MIP_PIO.C
were modified. A loop was added in the reset_mip() due to 
the narrow IOW cycle width to insure the reset pin is
held low long enough for a proper neuron hardware reset.
The file MIP_EXEC.C was also modified so that the
signon message no longer credits Avalon Control Technologies
since Vista Electronics, Inc. has purchased Avalon
Control Technologies.

Version 2.10
Date 04/22/97
The command line parsing now allows any IRQ number
from 3 to 14 in file MIP_EXEC.C. Before, only IRQ's 
3,5,10,11 and 12 were supported. NOTE: even though
the driver now accepts IRQ's 3 to 14, the board
only supports IRQ's 3,5,10,11 and 12 without a 
hardware modification.


For additional information contact:
Vista Electronics, Inc.
Phone: 661-294-9820
FAX: 661-294-9857
Email: vista@vistaelectronics.com
URL: www.vistaelectronics.com
